售前核算
报价之前有几件事必须核算清楚,不然售后天天来找你麻烦:货能不能真举到那个高度、车能不能拐进那条巷道、车能不能进那个集装箱门、怎么充电、自重加货重会不会压坏货梯。这些事客户经常不会主动问,等设备买回去装不下、举不动才想起来找你算账。这一章教你在报价前把这几本账先算一遍,涉及的公式和数值都放进了换算工具,麻烦提前解决,比事后道歉省心得多。
读完这章你能在报价前把承载、通道、门高、充电这几本账算清楚,少踩售后的坑。
报型号之前过一遍这五项,能挡掉大部分售后纠纷。
Run through these five checks before quoting a model — it heads off most after-sales disputes.
坡度换算、充电时间、货梯载荷的计算放在换算工具里。
Grade conversion, charging time, and freight-elevator load calculations are all in Conversion Tools.
承载核算
Load-capacity check
永远用载荷曲线,不用铭牌值。ES15i 举到 4m 时远不到 1.5t。加侧移器等属具还要再扣,曲线图下方有注明,具体数值向工厂确认。
Always use the load curve, never the nameplate rating. An ES15i lifting to 4m carries well under 1.5t. Attachments like a side shifter deduct further — noted below the curve chart; confirm the exact figures with the factory.
通道核算
Aisle-width check
小车直接查样本的 AST(T20i 配 1000×1200 托盘为 1980mm)。非标托盘用下面的公式,其中 x 是载荷轮轴到叉根的距离,需要向工厂要。
For small trucks, just look up the catalog's AST (T20i with a 1000×1200 pallet is 1980mm). For non-standard pallets, use the formula below, where x is the distance from the load-wheel axle to the base of the forks — get this from the factory.
叉车表里的“直角堆垛通道”要再加货长和安全间隙。FB 和 FB…P 两张表这一项口径明显不同(2155 对 4148),报给客户前先跟工厂核实。
For forklifts, the "right-angle stacking aisle" figure in the table needs the load length and safety clearance added on top. The FB and FB…P tables clearly use different conventions for this figure (2155 vs. 4148) — verify with the factory before quoting a customer.
门高与集装箱
Doorway height and containers
看门架缩回高度 h1 和护顶架高度。标准集装箱门高约 2280mm,FB15–FB25(门架 1995,护顶架 2100–2150)能进。进箱作业选全自由提升门架 VFM 或 VN。
Check the collapsed mast height h1 and the overhead guard height. A standard container doorway is about 2280mm — the FB15–FB25 (mast 1995, overhead guard 2100–2150) will fit. For work inside containers, choose a full free-lift mast, VFM or VN.
充电
Charging
小车用 48V 3A 或 5A 充电器;ES15i、ES15i-S、ES16-S 内置充电器,插普通插座即可;叉车侧面充电口配外置充电机。各国插头和电压逐单确认。
Small trucks use a 48V 3A or 5A charger; the ES15i, ES15i-S, and ES16-S have built-in chargers — just plug into a normal outlet; forklifts have a side charging port paired with an external charger. Confirm plug type and voltage per order for each country.