Microlift学

售后接报

小白导读 · 解释

客户打电话来,语气很急:“车坏了,赶紧给我修!”这时候你的目标只有两个:一次性把该问的信息都问全,别让对方来回补充;再想办法让客户先别停工。这一章教你按固定顺序排查:先要型号、序列号、故障码、现象视频,再排除钥匙没插好这类低级问题,最后判断是不起升还是称重不准。跟着这个顺序走,大部分故障电话你都能在几分钟内理出头绪,而不是两眼一抹黑干着急。

读完这章你能按固定流程一次性问全故障信息,并先让客户不停工。

目标有两个:一次拿全信息,让客户不停工。

Two goals: get all the information in one pass, and keep the customer's operation running.

  1. 先拿信息型号、序列号、屏幕故障码、工作小时数、电量、现象视频。
  2. 排除低级问题急停是否拔起;钥匙或密码;电池是否插到位;手柄是否在行走区间(竖直或压到底会自动刹车,除非开了直立行走);龟速模式是否误开。
  3. 不起升是否超载触发溢流阀;液压油位;是否切到了手动起升模式。
  4. 称重不准先一键归零,再按屏幕流程重新标定;碰撞后有自动重新校准功能。
  5. 让客户不停工切手动模式先用着,再寄配件。电池、电机、刹车、油箱都是模块化设计,容易拆换。
  1. Get the information firstModel, serial number, on-screen fault code, hour meter reading, battery level, a video of the symptom.
  2. Rule out the basicsIs the e-stop popped out; key or password entered; is the battery seated properly; is the tiller in the drive zone (upright or pressed all the way down triggers auto-brake, unless upright-walking is enabled); is turtle mode accidentally on.
  3. Won't liftWhether overload tripped the relief valve; hydraulic oil level; whether it's switched to manual lift mode.
  4. Weighing is offFirst zero it with one button, then recalibrate following the on-screen steps; there's also an auto re-calibration function after a collision.
  5. Keep the customer runningSwitch to manual mode to keep working while parts are shipped. Battery, motor, brake, and hydraulic tank are all modular and easy to swap.
故障码对照表和维修手册不在产品样本里。第 2、3、4 步是行业通用排查逻辑,具体以公司维修手册为准。
The fault-code reference table and repair manual aren't part of the product catalog. Steps 2, 3, and 4 are general industry troubleshooting logic — always defer to the company's repair manual for specifics.
本章思维导图
售后接报 思维导图型号序列号故障码现象视频先拿信息急停/钥匙/密码电池是否插好手柄位置龟速模式误开低级问题排查是否超载液压油位手动起升模式不起升排查先一键归零按流程重新标定称重不准排查先切手动模式模块化拆换配件让客户不停工售后接报